PCB Design and Verification

Custom Designed PCBs to fulfil customers’ needs in a fast changing consumer electronics industry

Design Capabilities

  • High Speed Digital/Analog/Mixsignal PCB Design
  • Multilayer, High Speed, Surface Mount and BGA Packages with Blind Vias
  • PCBs with EMC and EMI Considerations
  • Signal Integrity Conscious Design
  • RF/Microwave PCB Design with RF blocks like LNA, Mixers, Oscillators etc.
  • Transmitter PCBs with 1 to 5 W PAs
  • RF PCBs using Low Loss and High Dk Material
  • Documentation and Verification at Every Stage
  • Interaction with your Selected PCB Manufacturer

Digital/Mixed Signal PCBs

Digital/Mixed signal PCBs with signal integrity considerations and, galvanic isolation between high power and signal areas based on FPGAs, Microcontrollers etc. Special consideration for high speed busses.

Eight Layer PCB for Media ASIC – Core 2.4GHz, Bus Speed 300MHz
Eight Layer PCB for Media ASIC – Core 2.4GHz, Bus Speed 300MHz
Four Layer Test PCB for IP Enabled Telephone Line Exchanges
Four Layer Test PCB for IP Enabled Telephone Line Exchanges
Six Layer PCB for Scalable VoIP Telephone Testing
Six Layer PCB for Scalable VoIP Telephone Testing
1x1mm 2 RF front-end, 1-6GHz 90nm CMOS chip, bond wired on 4-layer RF- PCB and connected with 50Ω low-reflection transmission lines.
1x1mm 2 RF front-end, 1-6GHz 90nm CMOS chip, bond wired on 4-layer RF- PCB and connected with 50Ω low-reflection transmission lines.
GaN transistor based layout of L & S band power amplifier, onboard DC/DC converter with OV/OC protection and temperature monitoring.
GaN transistor based layout of L & S band power amplifier, onboard DC/DC converter with OV/OC protection and temperature monitoring.
4-layer RF-PCB to characterize microstrip discontinuity due to step change in width and substrate thickness.
4-layer RF-PCB to characterize microstrip discontinuity due to step change in width and substrate thickness.
3D view of 2-layer power supply PCB, 4 onboard DC/DC converters with EMI filter & temp. sensing for OT protection.
3D view of 2-layer power supply PCB, 4 onboard DC/DC converters with EMI filter & temp. sensing for OT protection.

RF and High Power PCBs

Power Amplifiers, transceivers and other RF electronics with special attention to passive/active cooling and RF signal integrity

3D Packaging

3D printed casings for your PCB projects. 

Casing3
Casing2
Casing1
Casing4

Get In touch

Get access to detailed source files
Get Quotation